DEWALT DW715 12-Inch Single-Bevel Compound Miter Saw Review
If you need a miter saw that proves to be impressively accurate, then the heavy duty DeWalt DW715 will deliver. The DW715 is actually a single-bevel compound miter saw that is equipped with an accurate miter system. This compound miter saw also features a revolutionary machined base fence that provides additional support to ensure that the fence remains straight for a considerably long time.
A 15 Amp motor powers this compound miter saw, including its 12-inch carbide blade that is capable of spinning at 4000 RPM. Hopefully, reading this DeWalt DW715 review will convince you that this miter saw is ideal for making furniture-quality cuts.
Table Of Contents
DeWalt DW715 Features
I have thoroughly reviewed the Dewalt DW715 Compound Miter Saw features, and performance. To make you understand whether you should go with the product or not, discussed them in details below on this Dewalt DW715 Review.
This compound miter saw can cut framing and molding quite effortlessly, and can also be used for bevel cutting, crosscutting and miter-cutting, all thanks to its 15 Amp dependable and powerful motor. This enables to blade to operate at 4,000 RPM of non-load speed. The saw blade itself is attached to an automatic electric brake so it does not take more than 5 seconds for it to stop once the trigger has been released. When it comes to dimensional lumber, this powerful motor also gives this saw a 2×8 inch crosscut capacity.
Accurate Miter System & Tail Side Fence
A wide miter capacity between 0 and 50 degrees to the left and right is featured by the accurate miter system of this saw. The stainless steel dent plate of the miter system also has 11 positive stops as a result of which this saw can be set up quite easily and productivity is also improved. The sliding fence is quite tall. Up to 5-1/4 inch of crown molding and up to 6-1/2 inch of base molding can be nested vertically against it. When bevel cuts need to be made, the fence can also be easily moved out of the way by sliding it out.
Cam-Lock & Bevel Capability With Bevel Stops
The cam-lock miter handle of this saw can be easily adjusted. As a result, the cutting angles are always precise and rapid, and dent override is made possible, i.e. the saw does not slip into the miter detent when the miter setting is being adjusted.
Due to the left and right bevel capacity of this saw, its cutting capacity is increased. To the left, bevel cuts can be made between 0 and 48 degrees and to the right, bevel cuts can be made between 0 and 3 degrees.
Another feature that makes this compound miter saw quite versatile is its 4 hardened steel bevel stops, which range from 0 to 48 degrees. As a result, the most common bevel angles can be set very conveniently and rapidly.
Blade Guard & Interlocking Trigger
It can be dangerous to work with a power tool, which is especially true in the case of saws due to their extremely sharp spinning blades. Of course, this has been taken into account by DeWalt, which is the reason this saw is equipped with a blade guard that keeps the blade covered. When the arm is lowered to cut the material, the guard moves up and out of the way, and as soon as the arm is lifted up, the guard resumes its position. The interlocking trigger also ensures that the saw does not accidentally start up.
Dimensions & Weight
This compound miter saw is lightweight since it has a weight of merely 42 pounds. It is also equipped with an inbuilt carry handle, so it can be easily lifted and moved around where you intend to use. At the end of the day, the saw can also be easily stowed away, considering that its dimensions are 27.7 inches x 20 inches x 18.8 inches, which means that it is not too large.
- This compound miter saw will cut effortlessly and silently.
- The miter scale is easy to read even.
- This saw will cut through wood rapidly thanks to its 32 tooth blade.
- The dust bag is relatively smaller so its contents will have to be dumped frequently.
Frequently Asked Questions (FAQ)
- Q : Can the DeWalt DW715 be used to cut 4×4?
A : This saw can effortlessly cut 4x4s. In fact, it can even cut 6x6s, although not in one go, i.e. they will have to turned over after the first cut.
- Q : Does the DeWalt DW715 make straight cuts?
A : As long as the blade’s adjustment has not gotten A out during shipping and it is still 90 degrees to the bed, this saw will make straight cuts. Of course, this angle can be easily adjusted.
Overall, this model is one of the finest miter saws, built to be used under rugged conditions and is capable of handling a myriad of tasks, which has probably become apparent after reading this DeWalt DW715 review. The accurate cutting angles, the ease of use and the numerous blade stops are sure to impress you. Whether you casually like to do DIY projects or you are a professional contractor, this compound miter saw is high recommended for bevel and miter cutting.