How to Use a Miter Saw -The Basics of Using a Miter Saw

Miter saws are indispensable tools around the workshop because of their high utility value in making crosscuts, bevel cuts, miter cuts, and compound cuts. Other miter saws are specifically designed for cutting aluminum sashes and soft steel. However, it is important for every miter saw operator to learn about the most effective ways of making clean and accurate cuts.

how-to-use-mier-saw

Moreover, you must master some of the crucial safety measures to avoid incurring injuries in the line of duty. Read on and find out about some of the essential steps that you should engage to make perfect cuts and enhance the capacity of your miter saw.

Get your Settings Right

Miter cutting is one of the most common tasks for a miter saw operator. In order to make a perfect miter cut, you must ensure that the saw is set at the appropriate angle. You should use the knob and lever at the front of the saw to adjust to the desired angle before you lock down the set-up for accurate results.

Always ensure that you have marked the piece of lumber at the exact place where you want to make the miter cut. Do not start the saw before you are satisfied with the alignment of the blade with the marked area on the piece of work. Bevel cuts are made by setting the miter angle at zero and the bevel angle at 45 degrees.

Making Compound and Crosscuts

Compound cuts may appear to be the most complex of all cuts, but you could end up with astonishing accuracy by simply getting your adjustments right. Generally, compound cuts are a combination of bevel cuts and miter cuts.

For perfect results, you should set the miter angle at 31.6 degrees and the bevel angle at 33.9 degrees. Always make sure that the settings are perfect before you embark on the cutting process. In order to get a perfect crosscut, always ensure that both the miter angle and the bevel angle are set at zero.

Support your Work Pieces

If you want to get precise angles and minimize the risk of injuries, then you must nurture the discipline of supporting your work pieces. Without support, the spinning blade can push back the work piece with dangerous aggressiveness, which can lead to accidents at the work place.

Besides, the finished work can fall off after the cutting and compromise the quality of the results. You may use some added extensions or a section of the miter saw stand to support the work piece.

Retain your Hand 6 Inches from the Blade

Always ensure that your hands and fingers are safe when operating a miter saw. Experts recommend placing your hand at least six inches from the blade and the cutting area. In is not advisable to work on very short pieces of lumber because they can compromise the element of safety owing to the short distance between the hand and the blade.

Other safety measures include wearing of protective glasses and earmuffs. It is also important to avoid loose clothing and dangling accessories when operating a miter saw.