How to Work Safely with a Miter Saw – Easy Five Steps

Before you start working with your miter saw, you should ensure that all the safety measures are firmly in place. Miter saws are designed to deliver great power for making quick, accurate, and clean cuts. However, these machines can be extremely dangerous if you operate them without care.

How to Work Safely with a Miter Saw

Read ahead and find out how to work safely with a miter saw

 

 Use Safety Glasses and Ear Muffs 

safety-glasses-1317400Your eyes and ears are some of the most important parts of the body that require enough protection when operating a miter saw. The speed and power of the coasting blade causes saw dust or specks of material to fly around your face. Some of them may get into your eyes causing severe discomfort and a possible health condition in the long term.

In order to protect your eyesight, always use standard safety glasses while sawing. Besides, you should also use ear muffs to protect yourself from intense noise from the motor. The ear muffs also prevent saw dust from getting into your ears.

 Clamp the Miter Saw on a Stable Stand 

Usually, every miter saw has a recommended stand that is especially designed to hold it in place during the sawing process. However, designers of miter saw stands have made special types of miter saws that can be used by nearly every type of miter saw.

The bottom line is that miter saw stands are very crucial for ensuring stability, accuracy, and safety of the machine. The risk of accidents is higher when a miter saw is held on surfaces that lack special features for firm holding. High quality stands are designed to prevent falls, movements, or general disorientation, which may cause injury.

 Clamp the Miter Saw on a Stable Stand 

First, you should use the recommended blade size to avoid accidents that result from technical flaws and mismatches. Secondly, it is very important to check and tighten the saw blade regularly to ensure that it is in perfect form before you begin the sawing. Loose saw blades are among the leading causes of injuries involving miter saws at the workshop.

Therefore, you must maintain the habit of checking the blade for consistency before making your miter cuts, crosscuts, bevel cuts, or any sawing task. Apart from guaranteeing your safety, tightened saw blades have a higher level of precision.

 Maintain a 6-Inch Clearance from the Blade 

The slightest loss of concentration can be very dangerous for any miter saw operator. Standard safety regulations require the operator to ensure that the hand is at least six inches away from the miter saw blade and the cutting area.

Moreover, it is also necessary to ensure that the material is completely against the back fence of the miter saw. The arrangement prevents accidental movements of the stock and reduces the risk involved in the sawing process. For safety purposes, it is recommended not to cut very small pieces because they can compromise on your safety.

 Stop the Blade before Lifting it off the Material 

Some miter saw blades achieve a spinning performance of 5000 RPM or more. Such incredible spinning require high levels of care on the part of the operator. Once you are through with the cutting process, you should release the trigger and wait for a moment so that the saw stops completely.

Do not endanger yourself and others around the workplace by lifting a spinning blade from the piece of lumber. In fact, such a move may also lead to scarring, which diminishes the quality of your work. For safety purposes, ensure that the blade is still and harmless before lifting it away.