Makita LS1040 Compound Miter Saw Review

If you are looking for a portable general-purpose miter saw that will prove to be reasonably accurate and very lightweight, then you should certain read this Makita LS1040 review. The 1,650W brush motor of this compound miter saw will provide sufficient power for a variety of applications, such as cutting aluminum.

Makita-LS1040-Compound-Miter-Saw

>> Click Here To See More Photos <<

Not only does the back fence has holes drilled in it for extra support plates, its left hand side also features a pivoting section that you can move in and out of position for adequate support. This compound mitre saw comes with a dust bag, material clamp, service tools and a TCT saw blade.

Makita LS1040 Features

I have thoroughly reviewed the Makita LS1040 Compound Miter Saw features, and performance. To make you understand whether you should go with the product or not, discussed them in details below on this Makita LS1040 Review.

Build & Safety Features

The Makita LS1040 is an extremely portable compound mitre saw a little over 33 pounds. So it is comparatively lighter than other mitre saws with similar features, which usually weigh over 35 pounds. If you will have to constantly move this tool on a daily basis, this will prove to be a major benefit.

The side of the tool has a stopper pin, so the handle can be locked in lowered position whenever carrying it from one place to another. Once the machine needs to be used, simply the stopper pin will have to be released and the saw will be ready to go for hours of cutting.

This saw is also equipped with a safety lock-off button, which will help prevent it from starting up unintentionally. There is even an electric blade brake, which can be used in cases where the blade does not stop upon releasing the switch trigger.

15 AMP Motor

4600 RPM of no-load performance will be delivered by the 15 Amp direct-drive dynamically balanced motor of this compound mitre saw. Unlike belt-drive units, Makita has engineered this motor such that it will never bog down or slip. Even under load, constant speed will be maintained by the electronic speed control, and this compound mitre saw will start up smoothly each and every time thanks to the soft-start technology.

Rapid Set Up

It will not take more than 2 minutes to have this compound mitre saw up and running, and you will not even have to read the manual or use anything that did not come with it. The blade was pre-installed and everything was in place, so the Makita LS1040 was practically ready for cutting straight out of the box.

Makita-LS1040

You will be able to make any adjustments quite intuitively and you will not have to use any additional tools. You will not have to bother yourself with removing rust prevention goop or pondering over mysterious parts contained in little packages.

Precise Cutting Angles

The construction of the turn base’s swiveling mechanism is impressive. The mitre angle of this saw is the same as that of any other mitre saw. Simply, the lock lever has to be pressed, rotated to a desired angle and then released. However, this compound mitre saw has a comparatively more refined and solid movement. Not only the turn base move smoothly, there are 9 positive stops between 0 and 45 degrees, both left and right, where the turn base can be locked in precisely and solidly.

Types of cuts

Makita LS1040 reviewThis compound mitre saw is ideal for press cutting. There is a vice that can be used to secure the workpiece in position and it can then be cut very smoothly by lowering the blade. Similarly, you can also adjust the blade to any desired mitre angle in order to accomplish some mitre cutting.

The blade can also be locked into any desired bevel angel by loosening the lever so that the blade tilts and then tightening the lever once the blade is at the desired bevel angle. This compound mitre saw can make precise bevel cuts.

>> Click Here To Read Specification, Customer Reviews and Rating <<

Excellent Fence

The Makita LS1040 is equipped with a solid fence that features an excellent finish and fit. It will barely flex and will be perfectly square to the cutting surface. A useful sub-fence is also included that provides support when making mitre and square cuts, while it can also be flipped to the side when clearance is required to make bevel cuts.

 Pros                                                         

  • Accurate measurement indicators
  • Comfortable grips with barely any vibrations
  • Easy to use
  • 5 year limited warranty
  • Lightweight and portable
  • Quiet yet speedy operation
  • Very sturdy

 Cons                                                       

  • The dust collector bag is not very useful

Frequently Asked Questions (FAQs)

  • Q: Can this saw be used to cut 4×4 inch timber?
    A: Yes, this saw can cut 4×4 inch timber without any problems, although it may take slightly more time to cut hardwoods.
  • Q: What are the cuts like that this saw makes?
    A: Absolutely perfect cuts are made by this saw, so it can be woodworking projects like building small cabinets or wall clocks.

 

>> Click Here To See More Question & Answer <<

Conclusion

If you are looking for a 10-inch compound mitre saw with a clean design and solid construction, then it is unlikely you will get anything better than the Makita LS1040 review with this price range. Hopefully this Makita LS1040 review has convinced you that the quality of construct that this compound mitre saw features is beyond impressive and it will ultimately exceed your expectations once you operate it.

Buy Makita LS1040 on Amazon , Now !!